Publications

 

Authors of accepted presentations at the ISyDMA’5 Symposium are invited to submit their full manuscripts for publication reviewed as journal articles. All submitted articles must be written in English only, and should report original, previously unpublished research results, experimental or theoretical, and the final decision will be made based on peer review reports. These papers will be published in International Journals indexed:

 

 

Spectroscopy letters Journal Published by Taylor & Francis

http://www.tandfonline.com/action/journalInformation?journalCode=lstl20#.VeFVTpc0_lU

Impact Factor 2018: 1.08

The Spectroscopy letters Journal provides vital coverage of fundamental developments, new or improved instrumentation, spectroscopic diagnostics, and applications of spectroscopy across all disciplines where spectroscopy is used. The journal offers communications about original experimental and theoretical work on such methods as NMR, ESR, microwave, NIR, Raman and UV spectroscopy, together with atomic emission, absorption, and fluorescence, X-ray spectroscopy, all forms of organic and inorganic mass spectrometry, laser spectroscopy, electron microscopy, molecular fluorescence and molecular phosphorescence.
– The authors are requested to prepare their manuscripts according to the paper Instructions for Authors.
Paper Submission Date : June 30th , 2020
See the Instructions for authors (SL Journal) :

https://www.tandfonline.com/action/authorSubmission?show=instructions&journalCode=lstl20

There is NO COST for submission and publication of full length paper in the Spectroscopy letters Journal.

Spectroscopy letters Journal Published by Taylor & Francis

Journal of Energy Systems (Scopus)

https://dergipark.org.tr/en/pub/jes

The Journal of Energy Systems (JES) aims to publish high quality research and review papers on energy systems design and implementation. The submitted materials must fulfill the conditions of being innovative, sustainable and practical information to make an impact on the society of energy engineering. The novel research may cover experimental practices, theoretical studies or both of them. The journal promotes the contributions of academic and technical bodies from especially the interdisciplinary research groups, thereby new ideas can be discussed in a scientific manner.
Journal of Energy Systems is an international, open-access, peer-reviewed and article process and charge-free journal.
-The authors are requested to prepare their manuscripts according to the paper Instructions for Authors.
Paper Submission Date : June 30th , 2020
See Author Guidelines (JES)https://dergipark.org.tr/en/pub/jes/writing-rules There is NO COST for submission and publication of full length paper in the Journal of Energy Systems.
Journal of Energy Systems (Scopus)

Journal of Reinforced Plastics and Composites

https://journals.sagepub.com/home/jrp

Impact Factor 2018-19: 1.786

The Journal of Reinforced Plastics and Composites (JRPC) is a fully peer-reviewed international journal that publishes original research and review articles on a broad range of today’s reinforced plastics and composites including areas in:
– Constituent materials: matrix materials, reinforcements and coatings.
– Properties and performance: The results of testing, predictive models, and in-service evaluation of a wide range of materials are published, providing the reader with extensive properties data for reference.
– Analysis and design: Frequency reports on these subjects inform the reader of analytical techniques, design processes and the many design options available in materials composition.
– Processing and fabrication: There is increased interest among materials engineers in cost-effective processing.
– Applications: Reports on new materials R&D are often related to the service requirements of specific application areas, such as automotive, marine, construction and aviation.
Reports on special topics are regularly included such as recycling, environmental effects, novel materials, computer-aided design, predictive modelling, and « smart » composite materials.
-The authors are requested to prepare their manuscripts according to the paper Instructions for Authors.
Paper Submission Date : June 30th , 2020
See Author Guidelines (JRPC) : https://journals.sagepub.com/author-instructions/JRP There is NO COST for submission and publication of full length paper in the Journal of Reinforced Plastics and Composites.
The Journal of Reinforced Plastics and Composites (JRPC)

Chemical Product and Process Modeling

https://www.degruyter.com/view/j/cppm?lang=en

Impact Factor 2018: 0.66

Chemical Product and Process Modeling (CPPM) is a quarterly journal that publishes theoretical and applied research on product and process design modeling, simulation and optimization. Thanks to its international editorial board, the journal assembles the best papers from around the world on to cover the gap between product and process. The journal brings together chemical and process engineering researchers, practitioners, and software developers in a new forum for the international modeling and simulation community. Editors represent top engineering institutions across the globe, such as the University of Tehran, the Ecole Polytechnique de Montreal, Rutgers, Indian Institute of Technology, the Technical University Hamburg, Jordan University of Science and Technology, Dalhouse University, University Politehnica of Bucharest, University College London, Auburn University, Universidade do Minho, National University of Singapore, University of Paderborn, University of Lapeenranta, University of Pannonia, The City College of New York, Indian Institute of Technology Roorkee, Texas A&M University at Qatar, Texas A&M University at Qatar, Politecnico of Milano, University of Wollongong, Norwegian University of Science and Technology, CANMET Energy Technology Centre, University of Saskatchewan, Universitat Politecnica de Catalunya, Ecole Nationale Supérieure en Génie des Technologies Industrielles, ENSGTI, University of Western Ontario, Aristotle University of Thessaloniki and Centre for Research and Technology, IFP Energies nouvelles, University of Calgary, Abo Akademi University, Technical University Hamburg, University of Auckland, UCLA School of Public Health and the University of Buenos Aires.

Topics
• equation oriented and modular simulation
• optimization technology for process and materials design, new modeling techniques
• shortcut modeling and design approaches
• performance of commercial and in-house simulation and optimization tools
• challenges faced in industrial product and process simulation and optimization
• computational fluid dynamics
• environmental process, food and pharmaceutical modeling
• topics drawn from the substantial areas of overlap between modeling and mathematics applied to chemical products and processes

-The authors are requested to prepare their manuscripts according to the paper Instructions for Authors.
Paper Submission Date : June 30th , 2020
See Author Guidelines (JRPC)http://mc.manuscriptcentral.com/dgcppm

There is NO COST for submission and publication of full length paper in the Chemical Product and Process Modeling.

Journal of Reinforced Plastics and Composites

Advances in Materials and Processing Technologies

(Taylor & Francis)

(indexed/abstracted in: British Library, EZB – Electronic Journals Library, Google Scholar, Scibase, Scopus, Ulrich’s Periodicals, WorldCat Local (OCLC))

https://www.tandfonline.com/action/journalInformation?show=aimsScope&journalCode=tmpt20

The Journal Advances in Materials and Processing Technologies (AMPT) covers advancement in materials and processes used to manufacture components and parts. Articles accepted for publication will report recent improvements in the properties of materials and development of recent technologies to manufacture components. The Journal will also cover new developments in processing and fabrication technologies of materials of various types including modelling, simulations, and experimental work. Equally, articles reporting innovation in manufacturing processes that reduce waste, enhance component performance, and ensure environmental sustainability will also be considered.
Specifically, the Journal will be interested in receiving manuscript contributions in the following areas:
-Effects of processing parameters on the macro- and micro-properties of all engineering materials.
-Innovations/ Improvements in processing techniques of all types of engineering materials including sustainability.
The topics of articles may be in one or more of the following areas:
-Metallic materials and their alloys; composite materials; non-metallic materials; bio-compatible materials; sensor materials.
-Manufacturing processes such as forming; machining; joining; welding; laser processing; plasma processing; micro- and nano- processing; quality and reliability issues of products & their applications.Editorial board of the AMPT Journal be pleased to publish a number of papers, subject to peer review, from the ISYDMA 5 Conference. These will be published in regular issues of the journal as and when the papers are ready.
See Author Guidelines : https://www.tandfonline.com/action/authorSubmission?show=instructions&journalCode=tmpt20
There will be no charge associated with publication in Advances in Materials and Processing Technologies, unless the authors wish to publish open access in which case the usual article processing charge will apply.
The Journal Advances in Materials and Processing Technologies (AMPT)